Is there a practical assessment?
Yes, this course consists of a theory based assessment as well as a practical assessment.
Supervise Asbestos Removal Sydney
Completion of the Supervise Asbestos Removal course is essential for managing the hazardous task of asbestos removal, highlighting the dangers and potential fatal outcomes of improper handling.
As mandated by SafeWork NSW, Supervise Asbestos Removal CPCCDE4008 qualification is a necessary training requirement for individuals seeking a license to remove friable (Class A) and non-friable (Class B) asbestos.
The course focuses on supervision of the asbestos removal process, ensuring safe practices, and compliance with the asbestos removal control plan (ARCP), including planning, worksite preparation, and maintaining safety protocols. The course also covers the importance of compliance, including air monitoring and certification by licensed assessors as per legislation.
approx 8 hours
Supervise Asbestos Removal
Supervise Asbestos Removal
Course CODE
CPCCDE4008
Supervise Asbestos Removal CPCCDE4008 Training Course is delivered and Statement of Attainments are issued by the Training Aid Australia (RTO No 91411).
Training Aid Australia is accredited by ASQA and approved by SafeWork NSW to deliver this training course.
Training Aid Australia
RTO № 91411
Training Aid Australia
RTO № 91411
Statement of Attainment issued within 24 hrs
Classroom
Based
SafeWorkNSW
Approved
Requires White Card and
Non Friable and/or Friable Asbestos Removal Qualifications
COVID-19 Update
COVID-19 Update
According to the government, state and ASQA guidelines, Edway Training remains open. Please refer to the booking calendar for the latest schedule.
COVID-19 Action Plan
In line with the federal government’s quarantine plan, we have changed our operations:
- We have increased sanitising of all surfaces and classrooms
- We have reduced the number of students in each class to be in line with the government’s requirements
- Anyone with signs of infection is refused entry into the classroom
- We are keeping our operations going at a significantly decreased capacity to allow our clients and students to get qualifications to start work during and straight after this crisis passes
We remind all the participants to follow health guidelines:
- Stay home if you feel unwell or recently visited (14 days) areas where COVID-19 is spreading
- If you have a fever, cough and difficulty breathing, seek medical attention and call in advance
- Follow the directions of your local health authority
We appreciate your support during these difficult times for our country and the world.
Supervise Asbestos Removal Course Information
- A team of tradespeople cannot legally undertake large-scale (10sqm+) asbestos removal work without the presence of a qualified Asbestos Safety Supervisor on site.
- Asbestos supervisor is required when:
- Friable asbestos (Class A) removal work is carried out, licensed removalists must ensure the supervisor is on site for the entire time during the removal
- Non-friable asbestos (Class B) removal work is carried out, licensed removalists must ensure the site supervisor is on site or readily available for the entire time during the removal
- This unit is required for all supervisors of the ACM removal process.
- The prerequisites for this training course are CPCWHS1001 Prepare to work safely in the construction industry, CPCCDE3014 Remove non-friable asbestos and/or CPCCDE3015 Remove friable asbestos.
- This course supersedes and is equivalent to CPCCBC4051A Supervise asbestos removal. SafeWork NSW recognises Statements of Attainment issued under a new unit of competency.
Play Video
Edway Sydney
Course details
What will you receive
Upon successful completion of the course, participants will receive:
- Statement of Attainment issued by Training Aid Australia
What will you learn
Supervise Asbestos Removal training covers topics such as plan supervision of asbestos removal, oversee the preparation for asbestos removal, supervise compliant testing and supervise removal and decontamination processes..
Supervise Asbestos Removal training course consists of PowerPoint Presentation, Class Activities, and Videos.
Supervise Asbestos Removal training course consists of PowerPoint Presentation, Class Activities, and Videos.
What will you receive
Upon successful completion of the course, participants will receive:
- Statement of Attainment issued by Training Aid Australia
What will you learn
Supervise Asbestos Removal training covers topics such as plan supervision of asbestos removal, oversee the preparation for asbestos removal, supervise compliant testing and supervise removal and decontamination processes..
Supervise Asbestos Removal training course consists of PowerPoint Presentation, Class Activities, and Videos.
Payment
When booking a course, online payment is required
This payment method ONLY applies to companies and employment agencies.
A valid Purchase Order / Authority to Invoice MUST be submitted prior to the day of training.
For more information, please refer to the ‘Invoice Payment Procedure’ section of the confirmation email or read our Invoice Payment Method Terms section.
Reviews
Course requirements
Current White Card
Participants must hold:
CPCWHS1001 Prepare to work safely in the construction industry
Statement of the Attainment or the plastic Construction Induction card (also known as the white card) must be presented on the day of training as a proof of qualification.
Please note that the old coloured cards (Victorian red card, NSW green card etc) issued prior to May 2009 are not accepted.
ENTRY TO THE COURSE WILL BE REFUSED
if participant DOES NOT present current white card.
Prior Competencies
Participants must hold:
CPCCDE3014 Remove non-friable asbestos if candidates wish to supervise non-friable ACM removal
OR
CPCCDE3015 - Remove friable asbestos if candidates wish to supervise non-friable ACM removal
OR
CPCCDE3014 AND CPCCDE3015 if candidates wish to supervise non-friable and friable ACM removal
ENTRY TO THE COURSE WILL BE REFUSED
if participant DOES NOT present current a relevant qualification.
100 points of ID
Participants must provide 100 points of I.D.
Please note that not all forms of I.D. are acceptable for a White Card course.
Check a list of accepted documents
STATEMENT OF ATTAINMENT WILL NOT BE ISSUED
if participants do not provide 100 points of accepted forms of I.D.
USI (Unique Student Identifier)
From 1 January 2015, every student who undertakes nationally recognised Vocational Education and Training (VET) in Australia is required to have a USI.
STATEMENT OF ATTAINMENT CANNOT BE ISSUED if a participant fails to produce a valid USI number.
USI can be obtained via www.usi.gov.au
Attendance
Participants should arrive 15 minutes prior to the scheduled starting time of the course to complete the necessary registration paperwork.
ENTRY TO THE COURSE WILL BE REFUSED if participants arrive 15 minutes after the scheduled starting time.
LLN (Language, Literacy and Numeracy)
The basic understanding, reading and writing of English is required.
As part of our pre-training review all students are required to complete an LLN assessment to determine a student’s eligibility for enrolment into their selected course.
All students enrolling into any Edway Training course must have LLN skills to do simple calculations, understand English well enough to be able to read, write, and provide verbal responses to questions in English to undertake training and assessment in any of our courses.
For further information on student support services please refer to the Student Handbook.
Current White Card
Participants must hold:
CPCWHS1001 Prepare to work safely in the construction industry
Statement of the Attainment or the plastic Construction Induction card (also known as the white card) must be presented on the day of training as a proof of qualification.
Please note that the old coloured cards (Victorian red card, NSW green card etc) issued prior to May 2009 are not accepted.
ENTRY TO THE COURSE WILL BE REFUSED
if participant DOES NOT present current white card.
Prior Competencies
Participants must hold:
CPCCDE3014 Remove non-friable asbestos if candidates wish to supervise non-friable ACM removal
OR
CPCCDE3015 - Remove friable asbestos if candidates wish to supervise non-friable ACM removal
OR
CPCCDE3014 AND CPCCDE3015 if candidates wish to supervise non-friable and friable ACM removal
ENTRY TO THE COURSE WILL BE REFUSED
if participant DOES NOT present current a relevant qualification.
100 points of ID
Participants must provide 100 points of I.D.
Please note that not all forms of I.D. are acceptable for a White Card course.
Check a list of accepted documents
STATEMENT OF ATTAINMENT WILL NOT BE ISSUED
if participants do not provide 100 points of accepted forms of I.D.
USI (Unique Student Identifier)
From 1 January 2015, every student who undertakes nationally recognised Vocational Education and Training (VET) in Australia is required to have a USI.
STATEMENT OF ATTAINMENT CANNOT BE ISSUED if a participant fails to produce a valid USI number.
USI can be obtained via www.usi.gov.au
Attendance
Participants should arrive 15 minutes prior to the scheduled starting time of the course to complete the necessary registration paperwork.
ENTRY TO THE COURSE WILL BE REFUSED if participants arrive 15 minutes after the scheduled starting time.
LLN (Language, Literacy and Numeracy)
The basic understanding, reading and writing of English is required.
As part of our pre-training review all students are required to complete an LLN assessment to determine a student’s eligibility for enrolment into their selected course.
All students enrolling into any Edway Training course must have LLN skills to do simple calculations, understand English well enough to be able to read, write, and provide verbal responses to questions in English to undertake training and assessment in any of our courses.
For further information on student support services please refer to the Student Handbook.
Current White Card
Participants must hold:
CPCWHS1001 Prepare to work safely in the construction industry
Statement of the Attainment or the plastic Construction Induction card (also known as the white card) must be presented on the day of training as a proof of qualification.
Please note that the old coloured cards (Victorian red card, NSW green card etc) issued prior to May 2009 are not accepted.
ENTRY TO THE COURSE WILL BE REFUSED
if participant DOES NOT present current white card.
CPCWHS1001 Prepare to work safely in the construction industry
Statement of the Attainment or the plastic Construction Induction card (also known as the white card) must be presented on the day of training as a proof of qualification.
Please note that the old coloured cards (Victorian red card, NSW green card etc) issued prior to May 2009 are not accepted.
ENTRY TO THE COURSE WILL BE REFUSED
if participant DOES NOT present current white card.
Prior Competencies
Participants must hold:
CPCCDE3014 Remove non-friable asbestos if candidates wish to supervise non-friable ACM removal
OR
CPCCDE3015 – Remove friable asbestos if candidates wish to supervise non-friable ACM removal
OR
CPCCDE3014 AND CPCCDE3015 if candidates wish to supervise non-friable and friable ACM removal
ENTRY TO THE COURSE WILL BE REFUSED
if participant DOES NOT present current a relevant qualification.
CPCCDE3014 Remove non-friable asbestos if candidates wish to supervise non-friable ACM removal
OR
CPCCDE3015 – Remove friable asbestos if candidates wish to supervise non-friable ACM removal
OR
CPCCDE3014 AND CPCCDE3015 if candidates wish to supervise non-friable and friable ACM removal
ENTRY TO THE COURSE WILL BE REFUSED
if participant DOES NOT present current a relevant qualification.
100 points of ID
Participants must provide 100 points of I.D.
Please note that not all forms of I.D. are acceptable for a White Card course.
Check a list of accepted documents
STATEMENT OF ATTAINMENT WILL NOT BE ISSUED
if participants do not provide 100 points of accepted forms of I.D.
Please note that not all forms of I.D. are acceptable for a White Card course.
Check a list of accepted documents
STATEMENT OF ATTAINMENT WILL NOT BE ISSUED
if participants do not provide 100 points of accepted forms of I.D.
USI (Unique Student Identifier)
From 1 January 2015, every student who undertakes nationally recognised Vocational Education and Training (VET) in Australia is required to have a USI.
STATEMENT OF ATTAINMENT CANNOT BE ISSUED if a participant fails to produce a valid USI number.
USI can be obtained via www.usi.gov.au
STATEMENT OF ATTAINMENT CANNOT BE ISSUED if a participant fails to produce a valid USI number.
USI can be obtained via www.usi.gov.au
Attendance
Participants should arrive 15 minutes prior to the scheduled starting time of the course to complete the necessary registration paperwork.
ENTRY TO THE COURSE WILL BE REFUSED if participants arrive 15 minutes after the scheduled starting time.
ENTRY TO THE COURSE WILL BE REFUSED if participants arrive 15 minutes after the scheduled starting time.
LLN (Language, Literacy and Numeracy)
The basic understanding, reading and writing of English is required.
As part of our pre-training review all students are required to complete an LLN assessment to determine a student’s eligibility for enrolment into their selected course.
All students enrolling into any Edway Training course must have LLN skills to do simple calculations, understand English well enough to be able to read, write, and provide verbal responses to questions in English to undertake training and assessment in any of our courses.
For further information on student support services please refer to the Student Handbook.
As part of our pre-training review all students are required to complete an LLN assessment to determine a student’s eligibility for enrolment into their selected course.
All students enrolling into any Edway Training course must have LLN skills to do simple calculations, understand English well enough to be able to read, write, and provide verbal responses to questions in English to undertake training and assessment in any of our courses.
For further information on student support services please refer to the Student Handbook.
Trainers Information
Philip Gillespie
Qualified Civil Engineer | Unrestricted Demolition Supervisor | Friable Asbestos Removal Supervisor
With over 30 years of hands-on experience in demolition, asbestos removal and contaminated site remediation, Philip Gillespie brings unparalleled expertise to the training and assessment fields. His career has spanned the full spectrum of civil engineering, with a particular focus on demolition and hazardous materials management. Now, as an instructor, Philip is dedicated to sharing his extensive knowledge with the next generation of industry professionals.
Key Qualifications:
- Bachelor of Engineering (Civil)
- Certificate IV in Training and Assessment
- Certificate IV in Work Health and Safety (WHS)
- Unrestricted Demolition Supervisor
- Friable Asbestos Removal Supervisor
- Excavator Operator
- Working at Heights Certified
- Confined Space Certified
Philip’s commitment to safety, precision, and excellence makes him an invaluable resource for those looking to advance their careers in construction, demolition, and asbestos management.
Book a Course
List View
- Step 1: Browse the list of available courses organized by date and location.
- Step 2: Click the Book Now button next to your selected course to start the registration process.
Calendar View
- Step 1: Check the calendar to find courses offered on specific dates.
- Step 2: Click on the Coloured Box of your preferred date and location to proceed with booking
34/195 Prospect Highway
SEVEN HILLS NSW 2147
SEVEN HILLS NSW 2147
Need help with a course?
Unable to attend, chose the wrong date, the wrong course, didn’t fit requirements? We will help you fix it!
Group Bookings
Edway Training is a well-established, Australian based short courses training provider. We specialise in courses for construction, health and hospitality
