White Card Melbourne Online
Construction Induction Training (also known as White Card or Red Card training) is the mandatory work health and safety training required prior to undertaking construction work anywhere in the state of Victoria.
IMPORTANT: From the 1st of January 2023, WorkSafe VIC does not allow delivery of the White Card training course via Zoom.
To obtain a white card, a person needs to complete 6 hour face-to-face general construction induction training course.
For more information about the classroom based white card training, course availability and online bookings, please visit our White Card Melbourne page.
Includes WorkSafe Fee
Price
$149
Includes WorkSafe Fee
Duration
6 Hours
Location
Virtual Classroom (via Zoom)
Prepare to Work Safely in the Construction Industry
Prepare to Work Safely in the Construction Industry
Course CODE
Our White Card training course is delivered and statements of attainment are issued by Edway Training Pty Ltd (RTO No 91401)
Edway Training is approved by WorkSafe Victoria and accredited by the Australian Skills and Quality Authority (ASQA) to deliver this training course.
Edway Training
RTO № 91401
Edway Training
RTO № 91401
Statement of Attainment issued on a day
Virtual Classroom via Zoom
WorkSafe VIC issued plastic card
Accepted All Across Australia
White Card Course Information
Construction Induction training is required for:
○ all persons who carry out construction work, including site managers and supervisors, surveyors
○ labourers and tradespersons, who access operational construction zones unaccompanied or not directly supervised by an inducted person
○ all persons whose employment causes them to routinely enter operational construction zones
- When applying for an Owner Builder licence you will be required to provide a copy of your plastic white card. Please note that the Victorian Building Association (VBA) accepts ONLY plastic cards. Paper Statements of Attainment are not accepted.
- If a person is out of the industry for 2 consecutive years, WorkSafe VIC recommends to re-do the course to be compliant and have up-to-date safety information.
- To get a replacement for a lost or stolen WorkSafe VIC issued white card, please contact WorkSafe VIC on 1300 852 562.
- This course supersedes and is equivalent to Work Safely in the Construction Industry. WorkSafe VIC recognises Statements of Attainment issued under a new unit of competency.
Course Details
What will you receive
- Statement of Attainment
- Construction Induction plastic card (which will be issued and mailed by WorkSafe Victoria)
What will you learn
White Card training course consists of PowerPoint presentation, class activities, videos and end of the day assessment.
Nationally accepted
What will you receive
Upon successful completion of the course, participants will receive:
- Statement of Attainment
- Construction Induction plastic card (which will be issued and mailed by WorkSafe Victoria)
What will you learn
Construction Induction training covers Work Health and Safety (WHS) related topics, such as health and safety legislative requirements of construction work, construction hazards and risk control measures, health and safety communication and reporting processes and incident and emergency response procedures.
White Card training course consists of PowerPoint presentation, class activities, videos and end of the day assessment.
Nationally accepted
WorkSafe VIC issued plastic white cards are nationally accepted all across Australia.
Payment
Online Payment $149
When booking a course, online payment is required
Invoice $149
This payment method ONLY applies to companies and employment agencies.
A valid Purchase Order / Authority to Invoice MUST be submitted prior to the day of training.
For more information, please read our Invoice Payment Method Terms section.
Reviews
Course requirements
ZOOM
To attend a training session, you'll require to have a device (laptop, desktop or tablet) that is compatible with Zoom.
To test if your device is compatible, visit zoom test page.
To check zoom's technical requirements, refer to the Zoom Technical Requirements section of the terms and conditions page.
CLASS CANNOT BE COMPLETED if does not access to Zoom
PPE (Personal Protective Equipment)
To attend the class, you MUST have the following PPE available prior to the beginning of the class.
PPE is available for sale through the hardware warehouses (such as Bunning or RSEA).
Please note that PPE must meet Australian Standards (refer to below list for standards and examples).
According to the WorkSafe VIC, following PPE is required
1. Head Protection (hard hat) (AS/NZS 1801 Occupational protective helmets) See Bunnings UniSafe Yellow Type 1 ABS Safety Helmet
2. Eye Protection (AS 1337.1 Personal eye protection, Eye and face protectors for occupational applications) See Bunnings EyeShileds Safety Glasses
3. Hearing Protection (AS/NZS 1270 Acoustics - Hearing protectors) See Bunnings 3M Disposable Ear Plugs
4. High visibility reflective vest (AS/NZS 4602.1 High visibility safety garments class day/night and AS/NZS 1906.4 - Retroreflective materials & High Visibility materials for safety garments) See Bunnings UniSafe Large Orange Hi-Vis Day / Night Safety Vest
ENTRY TO THE COURSE WILL BE REFUSED if does not provide required PPE
LLN (Language, Literacy and Numeracy)
As per WorkSafe Victoria requirements, the basic understanding, reading and writing of English is required. Use of interpreters and translators is not allowed.
As part of our pre-training review, all students are required to complete LLN indicator to determine a student’s eligibility for enrolment into their selected course.
All students enrolling into any Edway Training course must have LLN skills to do simple calculations, understand English well enough to be able to read, write, and provide verbal responses to questions in English to undertake training and assessment in any of our courses.
For further information on student support services please refer to the Student Handbook.
USI (Unique Student Identifier)
From 1 January 2015, every student who undertakes nationally recognised Vocational Education and Training (VET) in Australia is required to have a USI.
STATEMENT OF ATTAINMENT WILL NOT BE ISSUED if a participant does not provide a valid USI number.
All participants MUST provide their USI.
USI can be obtained via www.usi.gov.au
Attendance
Participants should be available 15 minutes prior to the scheduled starting time of the course to complete the necessary registration checks.
ENTRY TO THE COURSE WILL BE REFUSED if a participant arrives 15 min after the scheduled starting time.
Identification
Participants must provide one form of photo I.D. (e.g. passport, Australian driver’s licence, proof of age card, student card).
Please note that non-Australian Driver’s Licences are not accepted.
Check WorkSafe VIC list of acceptable forms of I.D.
After completing registration online, ID needs to be uploaded into the LMS and then presented during the Zoom training session.
STATEMENT OF ATTAINMENT WILL NOT BE ISSUED if participants do not provide a valid form of I.D.
ZOOM
To attend a training session, you'll require to have a device (laptop, desktop or tablet) that is compatible with Zoom.
To test if your device is compatible, visit zoom test page.
To check zoom's technical requirements, refer to the Zoom Technical Requirements section of the terms and conditions page.
CLASS CANNOT BE COMPLETED if does not access to Zoom
PPE (Personal Protective Equipment)
To attend the class, you MUST have the following PPE available prior to the beginning of the class.
PPE is available for sale through the hardware warehouses (such as Bunning or RSEA).
Please note that PPE must meet Australian Standards (refer to below list for standards and examples).
According to the WorkSafe VIC, following PPE is required
1. Head Protection (hard hat) (AS/NZS 1801 Occupational protective helmets) See Bunnings UniSafe Yellow Type 1 ABS Safety Helmet
2. Eye Protection (AS 1337.1 Personal eye protection, Eye and face protectors for occupational applications) See Bunnings EyeShileds Safety Glasses
3. Hearing Protection (AS/NZS 1270 Acoustics - Hearing protectors) See Bunnings 3M Disposable Ear Plugs
4. High visibility reflective vest (AS/NZS 4602.1 High visibility safety garments class day/night and AS/NZS 1906.4 - Retroreflective materials & High Visibility materials for safety garments) See Bunnings UniSafe Large Orange Hi-Vis Day / Night Safety Vest
ENTRY TO THE COURSE WILL BE REFUSED if does not provide required PPE
LLN (Language, Literacy and Numeracy)
As per WorkSafe Victoria requirements, the basic understanding, reading and writing of English is required. Use of interpreters and translators is not allowed.
As part of our pre-training review, all students are required to complete LLN indicator to determine a student’s eligibility for enrolment into their selected course.
All students enrolling into any Edway Training course must have LLN skills to do simple calculations, understand English well enough to be able to read, write, and provide verbal responses to questions in English to undertake training and assessment in any of our courses.
For further information on student support services please refer to the Student Handbook.
USI (Unique Student Identifier)
From 1 January 2015, every student who undertakes nationally recognised Vocational Education and Training (VET) in Australia is required to have a USI.
STATEMENT OF ATTAINMENT WILL NOT BE ISSUED if a participant does not provide a valid USI number.
All participants MUST provide their USI.
USI can be obtained via www.usi.gov.au
Attendance
Participants should be available 15 minutes prior to the scheduled starting time of the course to complete the necessary registration checks.
ENTRY TO THE COURSE WILL BE REFUSED if a participant arrives 15 min after the scheduled starting time.
Identification
Participants must provide one form of photo I.D. (e.g. passport, Australian driver’s licence, proof of age card, student card).
Please note that non-Australian Driver’s Licences are not accepted.
Check WorkSafe VIC list of acceptable forms of I.D.
After completing registration online, ID needs to be uploaded into the LMS and then presented during the Zoom training session.
STATEMENT OF ATTAINMENT WILL NOT BE ISSUED if participants do not provide a valid form of I.D.
ZOOM
To test if your device is compatible, visit zoom test page.
To check zoom’s technical requirements, refer to the Zoom Technical Requirements section of the terms and conditions page.
CLASS CANNOT BE COMPLETED if does not access to Zoom
PPE (Personal Protective Equipment)
PPE is available for sale through the hardware warehouses (such as Bunning or RSEA).
Please note that PPE must meet Australian Standards (refer to below list for standards and examples).
According to the WorkSafe VIC, following PPE is required
1. Head Protection (hard hat) (AS/NZS 1801 Occupational protective helmets) See Bunnings UniSafe Yellow Type 1 ABS Safety Helmet
2. Eye Protection (AS 1337.1 Personal eye protection, Eye and face protectors for occupational applications) See Bunnings EyeShileds Safety Glasses
3. Hearing Protection (AS/NZS 1270 Acoustics – Hearing protectors) See Bunnings 3M Disposable Ear Plugs
4. High visibility reflective vest (AS/NZS 4602.1 High visibility safety garments class day/night and AS/NZS 1906.4 – Retroreflective materials & High Visibility materials for safety garments) See Bunnings UniSafe Large Orange Hi-Vis Day / Night Safety Vest
ENTRY TO THE COURSE WILL BE REFUSED if does not provide required PPE
LLN (Language, Literacy and Numeracy)
As part of our pre-training review, all students are required to complete LLN indicator to determine a student’s eligibility for enrolment into their selected course.
All students enrolling into any Edway Training course must have LLN skills to do simple calculations, understand English well enough to be able to read, write, and provide verbal responses to questions in English to undertake training and assessment in any of our courses.
For further information on student support services please refer to the Student Handbook.
USI (Unique Student Identifier)
STATEMENT OF ATTAINMENT WILL NOT BE ISSUED if a participant does not provide a valid USI number.
All participants MUST provide their USI.
USI can be obtained via www.usi.gov.au
Attendance
ENTRY TO THE COURSE WILL BE REFUSED if a participant arrives 15 min after the scheduled starting time.
Identification
Please note that non-Australian Driver’s Licences are not accepted.
Check WorkSafe VIC list of acceptable forms of I.D.
After completing registration online, ID needs to be uploaded into the LMS and then presented during the Zoom training session.
STATEMENT OF ATTAINMENT WILL NOT BE ISSUED if participants do not provide a valid form of I.D.
Need help with a course?
Unable to attend, chose the wrong date, the wrong course, didn’t fit requirements? We will help you fix it!
