White Card Sydney – Connected delivery via Zoom
General Construction Induction Training Course (also known as the White Card training) is a mandatory legal requirement for all persons involved in the construction industry.
This course is delivered via ZOOM session (SafeWork NSW approved). If you would like to participate in a face-to-face session please consider booking into White Card NSW.
Duration
6.5 Hours
Location
ZOOM
session
Prepare to Work Safely in the Construction Industry
Prepare to Work Safely in the Construction Industry
Course CODE
Our White Card Training Course is delivered and statements of attainment are issued by Training Aid Australia Pty Ltd (RTO No 91411)
Training Aid Australia is approved by SafeWork NSW and accredited by the Australian Skills and Quality Authority (ASQA) to deliver this training course.
According to the SafeWork NSW requirements, participants wishing to complete White Card training through Zoom must be physically present within New South Wales during the time of the training session.
Participation from individuals located outside the state is strictly prohibited.
Training Aid Australia
RTO № 91411
Training Aid Australia
RTO № 91411
SafeWork NSW
approved
6.5 Hours
ZOOM session
White Card Course Information
- General Construction Induction Training is required for:
- all persons who carry out construction work, including site managers and supervisors, surveyors
- labourers and tradespersons, who access operational construction zones unaccompanied or not directly supervised by an inducted person
- all persons whose employment causes them to routinely enter operational construction zones
- Work Health and Safety Regulations 2017 Reg 317 states that
- (1) A person conducting a business or undertaking must not direct or allow a worker to carry out construction work unless
- (a) the worker has successfully completed general construction induction training, and
- (b) if the worker completed the training more than 2 years previously – the worker has carried out construction work in the preceding 2 years.
- To get a replacement for a lost or stolen white card, please contact SafeWork NSW on 13 10 50 or apply for a replacement online.
- The unit of competency CPCWHS1001 Work Safely in the Construction Industry supersedes and is equivalent to CPCCWHS1001 Work Safely in the Construction Industry.
Course details
What you will receive
- Statement of Attainment
- Statement of Training (which allows starting work immediately. A copy will be emailed on the same day and the original will be posted within 3 days)
- General Construction Induction plastic card (which will be issued and posted by SafeWork NSW)
What you will learn
White Card training course consists of PowerPoint presentation, class activities, videos and end of the day assessment.
Nationally Accredited
What you will receive
Upon successful completion of the course participants will receive:
- Statement of Attainment
- Statement of Training (which allows starting work immediately. A copy will be emailed on the same day and the original will be posted within 3 days)
- General Construction Induction plastic card (which will be issued and posted by SafeWork NSW)
What you will learn
Construction Induction training covers Work Health and Safety (WHS) related topics, such as health and safety legislative requirements of construction work, construction hazards and risk control measures, health and safety communication and reporting processes and incident and emergency response procedures.
White Card training course consists of PowerPoint presentation, class activities, videos and end of the day assessment.
Nationally Accredited
SafeWork NSW issued plastic white cards are nationally recognised all across Australia.
Payment
This payment method ONLY applies to companies and employment agencies.
A valid Purchase Order / Authority to Invoice MUST be submitted prior to the day of training.
For more information, please refer to the ‘Invoice Payment Procedure’ section of the confirmation email or read our Invoice Payment Method Terms section.
Reviews
Course requirements
ZOOM
To attend a training session, you'll require to have a device (laptop, desktop or tablet) that is compatible with Zoom.
To test if your device is compatible, visit zoom test page.
To check zoom's technical requirements, refer to the Zoom Technical Requirements section of the terms and conditions page.
PPE (Personal Protective Equipment)
To attend the class, you MUST have the following PPE available prior to the beginning of the class.
PPE is available for sale through the hardware warehouses (such as Bunnings or RSEA).
1. Head Protection (hard hat) (AS/NZS 1801 Occupational protective helmets) See Bunnings UniSafe Yellow Type 1 ABS Safety Helmet
2. Eye Protection (AS 1337.1 Personal eye protection, Eye and face protectors for occupational applications) See Bunnings EyeShields Safety Glasses
3. Hearing Protection (AS/NZS 1270 Acoustics - Hearing protectors) See Bunnings 3M Disposable Ear Plugs
4. High visibility reflective vest (AS/NZS 4602.1 High visibility safety garments class day/night and AS/NZS 1906.4 - Retroreflective materials & High Visibility materials for safety garments) See Bunnings UniSafe Large Orange Hi-Vis Day / Night Safety Vest
LLN (Language, Literacy and Numeracy)
As part of our pre-training review, all students are required to complete LLN indicator to determine a student’s eligibility for enrolment into their selected course.
All students enrolling into any Edway Training course must have LLN skills to do simple calculations, understand English well enough to be able to read, write, and provide verbal responses to questions in English.
If you feel you will require assistance, please ask to speak with a trainer confidentially at enrolment.
USI (Unique Student Identifier)
All participants MUST provide their USI.
If you do not have a USI, please create one here
STATEMENT OF ATTAINMENT WILL NOT BE ISSUED if a participant does not provide a valid USI.
Attendance and Location
Participants should connect to a ZOOM meeting 15 minutes prior to the scheduled starting time of the course to complete the necessary registration paperwork.
ENTRY TO THE TRAINING SESSION WILL BE REFUSED
if participants connect to the ZOOM session 15 minutes after the scheduled starting time.
To participate in white card training via Zoom, each participant must be physically located in NSW at the time of training.
Out of state participation is not permitted.
Identification
Participants must provide 100 points of I.D.
Please note that not all forms of I.D. are acceptable for a White Card course.
Check a list of accepted documents
STATEMENT OF ATTAINMENT WILL NOT BE ISSUED
if participants do not provide 100 points of accepted forms of I.D.
ZOOM
To attend a training session, you'll require to have a device (laptop, desktop or tablet) that is compatible with Zoom.
To test if your device is compatible, visit zoom test page.
To check zoom's technical requirements, refer to the Zoom Technical Requirements section of the terms and conditions page.
PPE (Personal Protective Equipment)
To attend the class, you MUST have the following PPE available prior to the beginning of the class.
PPE is available for sale through the hardware warehouses (such as Bunnings or RSEA).
1. Head Protection (hard hat) (AS/NZS 1801 Occupational protective helmets) See Bunnings UniSafe Yellow Type 1 ABS Safety Helmet
2. Eye Protection (AS 1337.1 Personal eye protection, Eye and face protectors for occupational applications) See Bunnings EyeShields Safety Glasses
3. Hearing Protection (AS/NZS 1270 Acoustics - Hearing protectors) See Bunnings 3M Disposable Ear Plugs
4. High visibility reflective vest (AS/NZS 4602.1 High visibility safety garments class day/night and AS/NZS 1906.4 - Retroreflective materials & High Visibility materials for safety garments) See Bunnings UniSafe Large Orange Hi-Vis Day / Night Safety Vest
LLN (Language, Literacy and Numeracy)
As part of our pre-training review, all students are required to complete LLN indicator to determine a student’s eligibility for enrolment into their selected course.
All students enrolling into any Edway Training course must have LLN skills to do simple calculations, understand English well enough to be able to read, write, and provide verbal responses to questions in English.
If you feel you will require assistance, please ask to speak with a trainer confidentially at enrolment.
USI (Unique Student Identifier)
All participants MUST provide their USI.
If you do not have a USI, please create one here
STATEMENT OF ATTAINMENT WILL NOT BE ISSUED if a participant does not provide a valid USI.
Attendance and Location
Participants should connect to a ZOOM meeting 15 minutes prior to the scheduled starting time of the course to complete the necessary registration paperwork.
ENTRY TO THE TRAINING SESSION WILL BE REFUSED
if participants connect to the ZOOM session 15 minutes after the scheduled starting time.
To participate in white card training via Zoom, each participant must be physically located in NSW at the time of training.
Out of state participation is not permitted.
Identification
Participants must provide 100 points of I.D.
Please note that not all forms of I.D. are acceptable for a White Card course.
Check a list of accepted documents
STATEMENT OF ATTAINMENT WILL NOT BE ISSUED
if participants do not provide 100 points of accepted forms of I.D.
ZOOM
To test if your device is compatible, visit zoom test page.
To check zoom’s technical requirements, refer to the Zoom Technical Requirements section of the terms and conditions page.
PPE (Personal Protective Equipment)
PPE is available for sale through the hardware warehouses (such as Bunnings or RSEA).
1. Head Protection (hard hat) (AS/NZS 1801 Occupational protective helmets) See Bunnings UniSafe Yellow Type 1 ABS Safety Helmet
2. Eye Protection (AS 1337.1 Personal eye protection, Eye and face protectors for occupational applications) See Bunnings EyeShields Safety Glasses
3. Hearing Protection (AS/NZS 1270 Acoustics – Hearing protectors) See Bunnings 3M Disposable Ear Plugs
4. High visibility reflective vest (AS/NZS 4602.1 High visibility safety garments class day/night and AS/NZS 1906.4 – Retroreflective materials & High Visibility materials for safety garments) See Bunnings UniSafe Large Orange Hi-Vis Day / Night Safety Vest
LLN (Language, Literacy and Numeracy)
All students enrolling into any Edway Training course must have LLN skills to do simple calculations, understand English well enough to be able to read, write, and provide verbal responses to questions in English.
If you feel you will require assistance, please ask to speak with a trainer confidentially at enrolment.
USI (Unique Student Identifier)
If you do not have a USI, please create one here
STATEMENT OF ATTAINMENT WILL NOT BE ISSUED if a participant does not provide a valid USI.
Attendance and Location
ENTRY TO THE TRAINING SESSION WILL BE REFUSED
if participants connect to the ZOOM session 15 minutes after the scheduled starting time.
To participate in white card training via Zoom, each participant must be physically located in NSW at the time of training.
Out of state participation is not permitted.
Identification
Please note that not all forms of I.D. are acceptable for a White Card course.
Check a list of accepted documents
STATEMENT OF ATTAINMENT WILL NOT BE ISSUED
if participants do not provide 100 points of accepted forms of I.D.
Book a Course
- To book a course, click on the Book Now button
on the right of your preferred date and location.
